YR2019 Flush Cut Servo Tuber Machine

Reel racks mechanism

Reel-stand (paper roll part)

1. The machine group is equipped with 5 groups of paper roll holders, and the paper reel adopts air swelling shaft, which is convenient to operate and accurate positioning. Each paper holder is equipped with an axial adjustment device to adjust the paper roll to the correct position;

2. Standard brake belt to control paper tension (magnetic powder brake control device can be added);

3. Put the spare paper roll in the empty holder, and use adhesive tape to glue it with the paper roll that is about to run out, to realize fast paper change;

4. The first paper roll holder is equipped with a guiding control device to locate the position of the paper tape;

Rectification mechanism

Automatic correction

1. Keep the paper tape along the scheduled running path to ensure the accurate operation of the after process and stabilize product quality, thereby improving efficiency and saving materials.

2. Adopt a four-layer structure, each layer is equipped with two parallel rollers, the rollers can be driven by servo motors according to a certain angle to move left and right, and equipped with sensors to detect the edge of the paper tape to control the position of the roller and then correct the position of the paper tape, so that the paper tape is guided in the correct position required by the paper bag cylinder.

3. Guide the operation of each layer of paper tape, correct the lateral deviation, convenient to operate;

Intermittent venting mechanism

Intermittent puncture mechanism

1. Four-layer design, each layer can adjust the cam structure or replace the cam to meet the needs of different pinhole lengths; The position of the piercing area can be adjusted;

2. Specification can change fast by replacing the piercing sleeve;

Horizontal glue dotting mechanism

Transverse glue dispensing

1. At both ends of the piercing line (the upper and lower parts of the paper bag cylinder), the multi-layer paper tape is glued to glue the multi-layer paper into a layer of integral paper tape, so that the subsequent gluing machine can be separated from the innermost layer when opening the mouth of the paper bag;

2. The horizontal step glue dispensing mechanism is composed of dispensing body, glue roller and glue homogenizing roller;

3. The dispensing body is equipped with a circular arc dispensing board, plastic connections installed on the dispensing board and a rubber head, and the position of the rubber head can be adjusted to adapt to the paper tube dispensing of different steps;

4. The amount of glue can be adjusted by adjusting the spacing between the glue roller and the glue dispensing body, and the rubber homogenizing roller;

Longitudinal glue brushing mechanism

Longitudinal strip glue

1. It is used for gluing the middle seam after the paper tape is formed and closed;

2. Controlled by the servo system, when the separation and pull-off position of the paper tape (or the straight cutting position) passes through the rubber wheel, it corresponds to the gap of the rubber wheel, so as to prevent the paper bag cylinder from sticking to each other due to glue overflow when the middle seam of the paper tape is pulled off;

3. The amount of glue can be adjusted by changing the spacing between the glue wheel and the rubber roller, and the rubber homogenizing roller;

Forming mechanism

Paper tube forming

1. It is used to roll the unfolded paper tape into a cylinder;

2. Can make A-shape edge and M-shape edge (M-shape edge need high configuration equipment);

3. The width of the cylinder can be adjusted through the hand wheel, and can also be adjusted together with the upper pressure wheel, which is faster and more convenient;

Main driving & straight cut mechanism

Traction & straight cut mechanism

1. The main mechanism that drag paper moving; Pressure of the traction roller is adjustable;

2. Single straight cutting mode;

Outputting mechanism

Bag output mechanism

The paper bag cylinder enters the outputting mechanism one by one after tearing off and separating, and stacks and conveys on the slow conveyor belt, when the count reaches the preinstall number, the cylinder near the output will jack up the middle belt that does not rotate, and the belt is pressed on the support frame, so the outputting channel of the paper bag is closed. The paper tubes at the rear end of the cylinder enters the bag collection area under the conveying of the slow belt to realize the separation of paper bag counting; The paper bag cylinder at the front end of the cylinder will be stacked more tightly under the running of the slow belt; When the preinstall time runs out, the cylinder retracts, and the paper tubes are transported to the bag collection area;